Uncategorized
Interface Mismatches Remain Key Barrier to Continuous Bioprocessing
Interface Mismatches Remain Key Barrier to Continuous Bioprocessing
Achieving end-to-end continuous bioprocessing without introducing surges and pooling remains a goal for biomanufacturers. As they transition from vat to hybrid or continuous processing, biomanufacturers optimize individual steps but often overlook their interfaces, creating an imbalance in the system.
“The primary barrier to end-to-end continuous biomanufacturing is often not the lack of continuous unit operations themselves. The larger challenge is integrating technologies such as perfusion culture, multicolumn chromatography, continuous viral inactivation, and continuous filtration into a coordinated manufacturing train,” Moo Sun Hong, PhD, assistant professor, Seoul National University, tells GEN.
“Our review suggests that unresolved interface mismatches between unit operations, particularly between steady upstream harvest and cyclic downstream purification, remain the dominant obstacle to achieving true end-to-end continuity,” Hong says. Interface engineering is vital to manage throughput, residence times, process robustness, and product quality across interconnected units.
One part of the study compared batch and continuous biopharmaceutical manufacturing across 10 metrics, while another considered the various degrees of continuous processing. They concluded that the advantages of continuous processing result mainly from process intensification, which, in itself, introduces new vulnerabilities such as measurement latency and uncertainty around residence time distribution.
The challenge for manufacturers is that limited coordination between upstream and downstream processing results in flow-rate mismatches. “Unit operations operate with fundamentally different dynamics,” Hong acknowledges. “Upstream perfusion generates a relatively steady harvest stream, whereas many downstream operations operate cyclically. This creates flow-rate and residence-time mismatches that often require surge tanks or hold steps. Eliminating these interruptions requires careful interface engineering, synchronization of cycle times, real-time monitoring, and coordinated control across the entire process train.”
Take a systems approach
Hong and colleagues recommend evaluating batch-to-continuous processing transitions based upon “integrated techno-economic, sustainability, and operational performance metrics rather than isolated unit-operation productivity alone.” Therefore, process engineers can design the interfaces and control strategies in a way that enables a fully-connected, automated, continuous manufacturing platform that functions in a near steady-state without the need for holding tanks between units.
In a continuous processing environment, control strategies based on process analytical technology (PAT) and digital twin technology are vital. Hong calls them “the backbone of integrated continuous manufacturing.”
Specifically, PAT provides visibility and real-time monitoring for rapid responses to process variances, while digital twins provide enhanced predictive models, as well as fault detection, optimization, and analysis. Additional automation and control architectures also should be included “…that connect sensors and programmable logic controller/supervisory control and data acquisition (PLC/SCADA) systems, as well as process data repositories, control loops, and supervisory models across the integrated process train,” the scientists advise.
“In our view,” Hong concludes, “the challenge is not simply making individual operations continuous, but making the entire manufacturing platform function as an integrated system.”
The post Interface Mismatches Remain Key Barrier to Continuous Bioprocessing appeared first on GEN – Genetic Engineering and Biotechnology News.
Uncategorized
New webinar: Tackling drug discovery challenges in cancer research

Hosted by Drug Discovery World and supported by Sartorius and BioIVT, this webinar will explore the opportunities and challenges that exist within cancer research drug discovery and development.
You will hear from Dr Sudha Rao, Chief Scientific Officer of Kazia Therapeutics, Karol Budzik, PhD, Business Development Associate at Vyriad Therapeutics and Lars van der Veen, Chief Scientific Officer at iOnctura.
Presentations will cover how cancer treatments have shifted towards reprogramming the biology driving tumour growth, immune escape and treatment resistance, the trajectory that in vivo CAR-T treatments are taking, and how challenging tumours burdened by stroma and immune-mediated resistance can be tackled.
Q&A with the speakers follows the presentations.
The post New webinar: Tackling drug discovery challenges in cancer research appeared first on Drug Discovery World (DDW).
Uncategorized
Psilocybin proves promising in neuropathic pain mouse study
Amid the rise of psychedelics in the mental health space, researchers have begun to explore psilocybin as a treatment for chemotherapy-induced peripheral neuropathy.
Uncategorized
New Spectrometry Technique Could Aid Formulation Development
New Spectrometry Technique Could Aid Formulation Development
A new technique combining two forms of spectrometry could help biopharmaceutical companies improve their choice of formulation buffer for antibody manufacturing by revealing how molecular forms and three-dimensional shapes of complex biologics respond to their environment. That’s the view of Christian Bleiholder, PhD, a professor at Florida State University who helped develop the technique.
According to Bleiholder, what happens structurally when a complex biological molecule, such as an antibody or viral spike protein, binds to its target is currently poorly understood.
“This is where [this approach] can help with the bioprocessing and formulation,” he says, as structural changes “can affect the lifespan [of the product] and lead to issues, such as aggregation.”
Because antibodies are complex, existing techniques tend to be powerful at different levels of complexity, he explains. Mass spectrometry is particularly powerful for distinguishing molecular composition, while structural approaches such as X-ray crystallography and cryo-electron microscopy can provide high-resolution structural information.
The challenge is understanding the link between these things within a heterogeneous sample, he says.
To overcome this, Bleiholder and his team worked with Bruker Daltonics to develop Tandem-Trapped Ion Mobility Spectrometry (Tandem-TIMS). This combines tandem ion mobility spectrometry with tandem mass spectrometry to disentangle three overlapping layers of molecular complexity: molecular form, three-dimensional shape, and binding or assembly state, he says.
He explains that, if the proteins have different structures, they can be characterized with tandem ion mobility spectrometry, and then mass spectrometry can be used to look at their molecular forms and binding states.
Going forward, Bleiholder hopes the technique can be used for formulation development but also earlier, during drug discovery of new products, such as multi-specific antibodies, to determine which molecular states are important and how those change when a biologic engages its target. He also plans to look at automating the technique.
Bleiholder spoke about using Tandem-TIMS at the Bioprocessing Summit in Boston earlier this year.
The post New Spectrometry Technique Could Aid Formulation Development appeared first on GEN – Genetic Engineering and Biotechnology News.
-
Uncategorized8 months agoNovartis buys Synnovation’s PI3Kα inhibitors for $3 billion
-
Endpoints News8 months ago
Novartis to pay $2B upfront to take next-gen PI3Kα inhibitor from Synnovation
-
Uncategorized7 months agoOptical Pooled CRISPR Screen Reveals Regulators of NF-κB Dynamics in Human Cells
-
Uncategorized6 months ago
Relay’s PI3Kα inhibitor clears efficacy bar in Phase 2 vascular anomalies study
-
Uncategorized5 months ago
Hybrid solid−liquid optics enable scalable, high-resolution light-sheet microscopy across diverse immersion media
-
Fierce Biotech8 months ago
Scientists turn pig semen extract into eye drops that kill cancer in mice
-
Nature Biotechnology8 months ago
Sustained nitric oxide production by engineered E. coli remodels the tumor microenvironment and potentiates immunotherapy
-
Nature Biotechnology8 months ago
Mapping cis-regulatory mutations at scale in sorghum enables modulation of gene expression
Scan to Read